This piece has been cut out of 1/2 inch African Mahogany. It took 3 hours to cut this piece out, and it is glued to 1 inch piece of Black Walnut. Total size of this piece is 9 1/2 x 13 inches. It has been finished with 3 coats of a high gloss ployurethane and is intended to hang on the wall. This pattern can be customized to a plaque design by glueing it to a piece of wood of your choice from our inventory.

Piece is cut out of Yellow Heart with Bubinga lettering, stars and stripes. Size of item is 9.5 x 6 x 1 inches. This piece is shown with "Navy", other inscriptions are available. Please specify in the order. The lettering can be customized for any branch of service. Also comming soon : POW ribbon, purple heart picture frame can be customize to hold purple heart medal.

This piece can be customized to the following types of wood: Oak, Black Walnut, Mahogany, Purple Heart, Yellow Heart, Red Heart, Bloodwood, Bubinga, Padauk, Bocote, Tigerwood, Poplar, Zebrawood.. This piece is made out of 5 different types of wood fitted together, which is called Intarsia. Size of item is 9 ½ x 7 ½ x 1 1/2 inches .This piece is available for $55.00 plus shipping and handling.

This checker board is made from Curly Maple(USA)squares and Katalox(Africa).The checker board squares are 1 3/4 x 1 3/4inches. The checker board was made 3/4 inch thick and glued to a piece of 3/4 inch Advanteck then I glued a piece of Laun Plywood to it . Then I framed it with Canarywood layered with Bocote(SO.AM.) then Bubinga(Africa). I spent about 5 hours making this board. I finished this board with three coats of exterior polyurethane.

Curly Maple Katalox (side view)

This piece is cut out of 1 1/2 inch Beech (USA) and glued to 1/8 inch Lauan Plywood for added strength and is intended to hang on the wall. It has been finished with 3 coats of semi-gloss polyurethane. It took 4 hours to cut this piece. you can order this pattern with your choice of wood from our stock.The length of this piece is about 11 inches .

This piece is made out of 1 inch thick Tiger wood glued to 1/8 inch Luan Plywood.the size of this piece is 11 inches long by 9 inches wide .This piece is cut out of one solid piece of tiger wood.

This piece is cutout of 1/2 inch piece of sapele glued to1 inch piece of ash . This piece is intended to hang on the wall or you may purchase an easel to set on any shelf for an additional cost. This piece took 3 hours to complete. This piece was layered with 3 other pieces of plywood and cut at the same time to make this pattern more economically affordable.

This piece was cut out of white Luan Plywood. Then glued to a 1 inch thick piece of African Mahogany. I finished this piece with 3 coats of high gloss polyurethane. This is a side view. This piece was cut at the same time with 4 other pieces, glued together to keep the cost low.

First of 2 pictures.

This piece is cut out of mahogany and glued to Tiger wood. I spent 3 hours cutting this piece. I finished this piece with 3 coats of polyurethane. It hangs on the wall

This piece is cut out of mahogany then glued to laun plywood. it took 3 hours to complete this piece